CAN RUST CHECK BE APPLIED TO VEHICLES OF ALL AGES?
Sealants provide a barrier between the metal and the environment, restricting contact of water and oxygen with the metal. In order to be effective, the sealant coating must remain intact. Consequently, sealant coating rely on good adhesion to the surface onto which they are applied.
Accordingly, sealants are best applied to new metals or freshly and thoroughly cleaned and dried metals. If applied to corroded, dirty or wet surfaces, they may not adhere properly to the surface, resulting in a non-intact, unprotective coating. It is particularly difficult to thoroughly clean and dry out the critical crevices and inner body panels areas.
In contrast, Rust Check remains fluid and very mobile and can fill in pores and other voids found in deposits of rust or other corrosion products. Rust Check also provides good penetration into rusted crevices. In cases where crevices are already rusting, Rust Check’s deep penetration by capillary action is of even greater importance. The active additives in Rust Check work on a microscopic scale to displace water from metal surfaces and then keep the water from re-contacting the metal.
Rust Check Coat & Protect can adhere to and protect lightly rusted surfaces. It also contains a very high percentage of active additives to “dry” the metal surfaces and keep them dry. Rust Check Coat & Protect also has considerable acid neutralizing capability.
Although Rust Check and Rust Check Coat & Protect will not reverse rusting that has already occurred, they will slow and control its spread.
© 2012 rustcheckoshawa.com All Rights Reserved
Web Site Specials
Web surfer specials, check back often for printable coupons. Click Here
FIGHTING RUST & TIPS